| Phsical Characteristics |
| Dimensions |
108*78*18mm |
| Weight |
200g/7.05oz. |
| Port |
USB Type C |
| Button |
ON / OFF, SCAN |
| Battery |
2000mAh(removable) |
| Charging Current |
5V / 1.5A |
| Charging Duration |
2 hours |
| LED Indicator |
Red indicator will be ON when charging |
| Green indicator will be ON when device has been fully charged |
| Blue indicator will be ON when battery is higher than 20% |
| Blue indicator will flash when battery is lower than 20% |
| Bluetooth is not paired when bluetooth indicator is OFF |
| Bluetooth is paired when bluetooth indicator is ON |
| Developing Environment |
| SDK |
Android / IOS SDK Supported |
| Communication |
| Type C USB |
USB connection to realize data transfer |
| BT |
Bluetooth Low Energy (BLE) 5.0 |
| User Environment |
| Operating Temp. |
-4°F to 122°F / -20°C to 50°C |
| Storage Temp. |
-4°F to 158°F / -40°C to 70°C |
| Humidity |
5%RH - 95%RH non condensing |
| Dropping |
1.2m / 3.94ft. dropping on concrete |
| Sealing |
IP65 |
| UHF |
| Engine |
CM710-1 module based on Impinj E710
CM2000-1 module based on Impinj Indy R2000 |
| Antenna Parameter |
Circular Polarized Antenna (3dBic) |
| Frequency |
920-925MHz / 902-928MHz / 865-868MHz |
| Protocol |
EPC C1 GEN2 / ISO18000-6C |
| Power |
1W (30dBm, support +5~+30dBm adjustable)
2W Optional (33dBm, for Latin America, etc.) |
| Max Read Range |
Impinj E710 chip:
11m (Impinj MR6 tag, size 70 x 15mm)
12m (Impinj M750 tag, size 70 x 15mm)
14m (Alien H3 Anti-Metal tag, size 130 x 42mm) |
| Impinj R2000 chip:
11m (Impinj MR6 tag, size 70 x 15mm)
8m (Impinj M750 tag, size 70 x 15mm)
9m (Alian H3 Anti-Metal tag, size 130 x 42mm) |
| Fastest Read Range |
900+ tags/sec |
| * Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment. |
| Accessories(Optional) |
| Wrist strap / arm strap / magnetic handle |